Ball valves are modern shut-off valves which are very reliable in operation.

Reliably sealed – inside and out

Ball valves are modern shut-off valves which are very reliable in operation. The circular bore guarantees a flow characteristic which is similar to a pipe. As there is no shut-off device in the flow, ball valves with full bore are piggable without any problems.

Due to the usage of standardised mounting flanges, the optimizing of operating torques and the high compatibility to different actuator designs and makes, our ball valves keep up with the increasing of automated production processes and the requirement of remote-controlled industrial facilities.

KLINGER UK offer five product ranges of ball valves which differ in three main features: nominal width range, construction and available end connection. The table below provides an overview on the available product ranges:

Product overview ball valves:

  • Hot water, steam and heat transfer oils: in power plants and district heating supply
  • Viscous media: e.g. bitumen (oil industry and refineries), molasses (breweries)
  • Liquid and gaseous media in refineries and tank farm construction (hydrocarbons, fuels and oils)
  • Liquid gas and natural gas
  • Compressed air supply in the industry
  • Dusty media: cement in plants and on silos
  • In the paper and textile industry: dye liquor, digester liquor
  • In the chemical industry: acid-resistant ball valves for chemical solutions (acids, bases, etc.)

Product details

Ballostar KHA
DN 10-125
flange, thread,  weld ends
Ballostar KHE
DN 15 - 200, ½“ - 8“
Ballostar KHI
DN 150-1000
2-piece (optionally fully welded)
flange, weld ends
Monolith KHO
DN 25-300
one piece, fully welded, massiv
for underground installation
weld ends
Monoball KHM
DN 15-150
one piece, fully welded
flange, thread, weld ends